Products list
Manual Mold Silicone Rubber

HY-570 Manual Mold Silicone Rubber

Name: HY-570 Manual Mold Silicon rubber
Number: HY-570
Count: 10011
Distribution time: 2010-06-21
Usage: For large size products, master mold design, electronic product printing positioning.

HY-570 manual mold silicone rubber is flowing liquid with consistent quality in whatever color. It consists of two components, component A is silicone rubber, and component B is curing agent or catalyst. Firstly,prepare the master mold or the product to be duplicated, take certain amount of the silicone rubber, add 2-3% curing agent, and mix them evenly for use,a mold can be obtained in 2-3 hours. The mold with resistance to deformation and linear shrinkage and high temperature can be used repeatedly to provide fast duplication, and it with low shrinkage up to 2‰. The 570 manual molding silicon is mainly applicable to manual molds and small quantity of product duplication.

The 570 silicone rubber is mainly applicable to manual mold design, PVC plastic molds, cement product molds, melting point alloy molds, alloy toy craftworks, plastic toy craftworks, gifts and stationery, large statues, duplication of cultural relics, shoe sole mold fabrication, pad printing positioning, shock resistance for electronic equipments, etc.

Standard Datasheet:

Model Appearance Viscosity (cps) Hardness (Ao) Tensile Strength (Mpa) Tear Strength (KN/m) Elongation (%) Mixing ratio (%) Pot life (H) Demould time(H)
570 White 45000~52000 70±2 ≥1.0 ≥0.5 ≥130 2~3 0.5 2~4

Operation Instruction for Manual Mold Silicone rubber:
1. The manual mold silicon is applied to small products or products with fine patterns. The mold for the fine detailed and small products should be made of soft silicon to protect the products from easy breaking when demoulding.
2. If large product duplication or fabrication, the mold should be made of higher hardness silicone rubber so that the products made will not deform.

Hong Ye Jie Silicone Company is an experienced manufacturer and supplier of manual mold silicone rubber in China. It is located in Shenzhne, and close to Hongkong. Here we have access to convenient transportation, developed trade and numerous ports, which effectively bring down our transportation cost, and save your shipping charges as well. In addition to the high quality low priced silicone rubber, we also provide attentive service for customers. If you need the silicone ruber, please do not hesitate to contact us. We at Hong Ye Jie welcome you to try our products and are confident that you will be satisfied with your purchase.

Feedback Form
Silicone Rubber